The quality of the photos, in terms of sharpness, exposure and accuracy of the required perspectives, significantly influence the result of our supply proposal for your customer. Missing information must be submitted subsequently; we accept no liability for incorrect information. Only customised photos will be accepted. General illustrations from brochures or similar will not be accepted. In particular, the position of the submersible device in relation to the wheelchair (user) must be measured precisely. The images must be created in such a way that the lengths of the distances can be recognised, or a description must be created that precisely specifies the dimensions and refers to a point on the wheelchair. Example: The centre of the submersible device is 50 cm above the floor and 10 cm in front of the footrest, in the middle of the seat width.

All variations that are possible from an adjustment option of the wheelchair must be recorded photographically. This applies to folding, footrest adjustment, seat tilt, seat height adjustment, standing function, adapted accessories (e.g. therapy table, traction unit, robotic arm), armrest adjustment or other circumstances affecting the assembly situation. Ask your customer whether such accessories are available or planned at. This is necessary because the mounting point of the wheelchair bracket must be selected in such a way that all functions of the wheelchair and all attachments and body parts can be operated without restriction.